Emergency Jump Start Energy Storage and Charging

Reboost Jump Starter with Portable Energy Storage Power Supply

Jumpstart Immediately For 12V Diesel / Gasoline Cars

Through thousands of voltage and current measurements， the car can be jump started in a second when the car battery is Low.1600A Peak current | 800A Starting curren

Applicable Vehicles

Sedan, SUVS, Commercial Vehicles, Minivans, Motocycles, Pickup trucks, Electric Cars

Charing Without Sockets

Emergency power supply for devices with rated power of less than 100w for daily use.

Electric fans (20W) Charge for about 150 minutesMini Fridges (65W) Charge for about 45 minutesiP Book 13.3 inches Charge for about 2 timesIP XS Charge for about 5 timesNote: Not Applicable to charging on devices over 100W

Four-port Output

Suitable for jumpstarting cars motocycles and charging on digital devices

Dual-use charger/energy storage Charge on Phones and Tablets

With Type-C to Type-C fast charging cable.About 1.5 Hours, Fully charge the jump starter, PLease use a 65W or above chargerand standard charging cable.

Jumpstart 20 Times after Charge Once

Strong energy storage for vehicle jumpstart, charging on equipment, emergency lighting, etc. Jumpstart more than 20 times, 12V/6.8L lMax.] asoline cars, 12V/5.5L[Max.] diesel cars.

Pressure-proof and Explosion Proof to Protect Vehicles

Smart power management and safe charging/-jumpstart.

60°C High Temperature Protection

The high-quality polymer Lithium battery ensures normaL jumpstart in the coLd/high temperature.

Emergency Lighting as a Warning

One-key switching for constant light, SOS, and flash modes. Park the car to repair by the roadside in Late night and turn on the emergency Light as a warning to prevent secondary accidents

Upgraded Nine Security Protections

Lithium Polymer Batteries | Over Charge Protection | Voltage Stabilization Protection | Constend Current Protection | Short-circuit Protection | Over-discharge Protection | Reverse Connection Protection | Over Heat Protection | Electromagnetic Field Protetion

3 Steps to Jumpstart

(1) Link, Connect the smart clip to the EC5 interface of the startup power supply.(Red and green lights flash alternately.)(2)Clip, Clip the EC8 intelligent jumper clamps to the positive and negative terminals of the car battery respectively, and the clamps enter the working state with the green light normally on.[Red:+，Black:-](3) Jumpstart, Start the car, and immediately remove the start-up power supply after the car starts.

220V EU CN Version

110V US JP Version